Stainless steel standards: EN and former DIN
Current EN standards and their former DIN numbers for tubes, bars, sheets and certificates – for clear enquiries.
EHI / BURBACH, GERMANYDrawings and orders often still show old DIN numbers. The tables help you assign them to the current standard. In your enquiry, please state standard, material number, dimensions and the required inspection certificate.
Tubes
| Current standard | Formerly | What it covers | At EHI |
|---|---|---|---|
| EN 10216-5 | DIN 17456 / 17458 | Seamless stainless steel tubes for pressure purposes | Seamless stainless steel tubes, hollow bars |
| EN 10217-7 | DIN 17457 | Welded stainless steel tubes for pressure purposes | Welded industrial tubes |
| EN 10296-2 | DIN 17455 | Welded tubes for mechanical engineering and general technical applications, e.g. railings, furniture, construction | Decorative and structural tubes, square tubes |
| EN 10357 | DIN 11850 (partly) | Welded tubes for the food and chemical industry | Food and beverage tubes |
| DIN 11850 | – | Tubes for food and chemicals, dimensions and grades | Food-grade tubes |
| EN 10305-1 | DIN 2391 | Seamless cold-drawn precision steel tubes, e.g. hydraulics | Precision and hydraulic tubes (from stock) |
| EN 10305-5 | DIN 2395 | Welded and sized precision hollow sections (square, rectangular, oval) | Precision hollow sections |
| EN ISO 1127 | DIN 2462 / 2463 | Dimensions, tolerances (D1–D4, T1–T4) and weights of stainless steel tubes | all stainless steel tubes |
| ASTM / ASME A/SA 312 | – | Seamless and welded pipes to US standard, schedules SCH 5S to XXS | Pipes in inch sizes |
| ASTM A269 / A213 | – | Tubes for general service and heat exchangers, often in inch sizes | Instrumentation tubes (inch) |
| ASTM A554 | – | Welded tubes for mechanical applications | Square and rectangular tubes |
Bars and profiles
| Current standard | Formerly | What it covers | At EHI |
|---|---|---|---|
| EN 10088-3 | DIN 17440 | Technical delivery conditions for semi-finished products, bars, rods and sections of stainless steel | all bar and profile products |
| EN 10060 | DIN 1013 | Hot-rolled round bars – dimensions and tolerances | Round bars rolled, peeled |
| EN 10278 | DIN 671 / 174 / 176 / 178 | Bright bars – dimensions and tolerances (round, flat, hexagon, square) | Bright bars h9, hexagon h11 |
| EN 10058 | DIN 1017 | Hot-rolled flat bars – dimensions and tolerances | Flat bars rolled |
| EN 10059 | DIN 1014 | Hot-rolled square bars – dimensions and tolerances | Square bars rolled |
| EN 10056-1 | DIN 1028 / 1029 | Equal and unequal leg angles | Angles |
| EN 10055 | DIN 1024 | Hot-rolled T-sections | T-sections |
| EN 10279 | DIN 1026 | Hot-rolled channels | Channels |
| ISO 2938 | – | Hollow bars for machining – dimensions and tolerances | Hollow bars |
Sheets
| Current standard | Formerly | What it covers | At EHI |
|---|---|---|---|
| EN 10088-2 | DIN 17440 / 17441 | Technical delivery conditions for stainless steel sheet and strip, surfaces 1D, 2B, 2R, 2G, 2J | Stainless steel sheets |
| EN ISO 9445-2 | EN 10259 | Cold-rolled sheets – tolerances on dimensions and shape | Sheets cold-rolled |
| EN ISO 18286 | EN 10029 (for stainless steel) | Hot-rolled sheets – tolerances on dimensions and shape | Sheets hot-rolled |
Testing and certificates
| Current standard | Formerly | What it covers | At EHI |
|---|---|---|---|
| EN 10204 | DIN 50049 | Types of inspection documents (2.2, 3.1, 3.2) | Mill certificates for all products |
| AD 2000 data sheet W2 / W10 | – | Material requirements for pressure vessels made of austenitic steels | Tubes and bars |
| NORSOK M630 | – | Material data sheets for the oil and gas industry (offshore) | Tubes and bars |
For guidance only; the current edition of the standard is decisive. Other standards and inspections on request.
Stainless steel tube finishes: old DIN and new EN
Many orders and drawings still use the old DIN codes such as “k3” or “d2”. The tables show which EN finish replaces them today – so you can order unambiguously.
| EN (new) | DIN (old) | Application |
|---|---|---|
| EN 10217-7 | DIN 17457 / DIN 17455 | welded tubes for pressure purposes |
| EN 10296-2 | DIN 17455 | welded tubes for mechanical engineering, construction, decoration |
| EN 10357 | DIN 11850 | tubes for the food and beverage industry |
| EN 10216-5 | DIN 17456 / DIN 17458 | seamless tubes for pressure purposes |
| EN 10312 | DVGW GW 541 | tubes for water and aqueous liquids |
Welded tubes: EN 10217-7 (formerly DIN 17457)
| EN 10217-7 | DIN 17457 | Finish | Surface |
|---|---|---|---|
| W0 | d0 | from hot-rolled strip, not pickled | metallic clean |
| W1 | d1 | from hot-rolled strip, pickled | metallic bright |
| W1A | d2 | from hot-rolled strip, heat-treated, pickled | metallic bright |
| W1R | d3 | from hot-rolled strip, bright-annealed | metallic bright |
| W0 | k0 | from cold-rolled strip, not pickled | metallic clean, smoother than d0 |
| W2 | k1 | from cold-rolled strip, pickled | metallic clean, smoother than d1–d3 |
| W2A | k2 | from cold-rolled strip, heat-treated, pickled | metallic bright, smoother than d1–d3 |
| W2R | k3 | from cold-rolled strip, bright-annealed | metallic bright, smoother than d1–d3 |
| WCA | l1 | min. 20 % cold-worked, heat-treated, weld metal recrystallised, pickled | metallic bright, weld seam barely visible |
| WCR | l2 | min. 20 % cold-worked, bright-annealed, weld metal recrystallised | metallic bright, weld seam barely visible |
| WG | o | ground | agree type and degree of grinding when ordering |
| WP | p | polished | agree quality and type of polishing when ordering |
| … b | … g | Suffix “b” (EN) or “g” (DIN): inner weld bead smoothed, e.g. W2Rb = k3g | – |
| EN 10217-7 | DIN (old) | Scope of testing |
|---|---|---|
| TC1 | PK1 (DIN 17457) | 1 tensile test and 1 ring test per test unit – without AD 2000-W2 |
| TC2 | PK2 (DIN 17457) | 2 tensile tests per test unit, 1 ring test per tube – usual with AD 2000-W2 |
Food and beverage tubes: EN 10357 (formerly DIN 11850)
| Code | Heat treatment | Inner surface | Outer surface |
|---|---|---|---|
| CC | pickled, not heat-treated | pickled and passivated | pickled |
| CD | not heat-treated | pickled and passivated | ground |
| BC | heat-treated | pickled or bright-annealed | pickled or bright-annealed |
| BD | heat-treated | pickled or bright-annealed | ground |
Seamless tubes: EN 10216-5 (formerly DIN 17456 / 17458)
| EN 10216-5 | Delivery condition and finish | Surface |
|---|---|---|
| HFD | hot-finished, heat-treated, descaled | metallic clean |
| CFD | cold-finished, heat-treated, descaled | metallic clean |
| CFA | cold-finished, bright-annealed | metallic bright |
| CFG | cold-finished, heat-treated, ground | metallic bright ground – agree grinding and roughness |
| CFP | cold-finished, heat-treated, polished | metallic bright polished – agree polishing and roughness |
Summary for guidance; the wording of the standard is decisive. Typical stock finishes: brushed = W0, pickled = W1/W2, annealed = W1A, W1R, W2A, W2R.
Request tubes ↗ Tolerances to EN ISO 1127 → Pipe sizes and schedules →
Frequently asked questions about standards
What is the difference between EN 10217-7 and EN 10296-2?
EN 10217-7 applies to welded stainless steel tubes under pressure, e.g. in pipelines and plant engineering, with specified tests. EN 10296-2 applies to structural and decorative tubes without pressure loading, for example for railings, furniture and mechanical engineering.
Are the old DIN standards still valid?
Most old DIN standards for stainless steel tubes and bars have been replaced by European EN standards, e.g. DIN 17457 by EN 10217-7 or DIN 671 by EN 10278. The old numbers still often appear in drawings and orders. We assign them to the current standard when you enquire.
What do D3/T3 mean for stainless steel tubes?
According to EN ISO 1127, classes D1 to D4 define the outside diameter tolerance and T1 to T4 the wall thickness tolerance. The smaller the number, the tighter the tolerance.
Which standard applies to seamless stainless steel tubes?
For seamless stainless steel tubes under pressure, EN 10216-5 applies (formerly DIN 17456 and DIN 17458). To US standards they are supplied to ASTM/ASME A/SA 312, cold-drawn precision tubes to EN 10305-1.
Which inspection certificate do I need?
For most industrial applications, the inspection certificate 3.1 to EN 10204 is sufficient. For pressure equipment or third-party inspection, a 3.2 certificate or proof to AD 2000 W2/W10 may be required. Please state your requirement in the enquiry.
Your enquiry
Send us material, dimensions and quantity – we will reply with availability, price and delivery time.
E-mail your enquiry ↗ +49 2736 29468-0
We reply in English or German. Prices and documents are issued by EHI Edelstahl GmbH & Co. KG, Burbach, Germany.
