EHI EDELSTAHL/ Stainless steel stockholder · Burbach, Germany
EHI EDELSTAHL / FLAT MATERIAL

Stainless steel flat bar

Stainless steel flat bar for metalworking, mechanical engineering and industrial manufacturing – matching the required dimension and surface finish.

Stainless steel flat bar with cut edges in the EHI Edelstahl warehouseEHI / PRODUCT & SERVICE

TECHNICAL DATA / DOWNLOADS

Dimensions & product range

All dimensions for flat bar – hot-rolled, cut, bright and ground, 10–300 mm wide – can be found with theoretical weight in our dimension search and in the 2026 product list. You can list several sizes in one enquiry.

Search dimensions →

Product list flat bar 2026 (PDF) ↗

The tables show the standard range of dimensions and are not a stock list: availability by grade, length and quantity is confirmed with our quotation. Dimensions not listed are sourced at short notice.

TECHNICAL ADVICE & MATERIAL SOURCING

Stainless steel flat bar for your application.

Flat bar is processed as a versatile semi-finished product. We match width, thickness, grade and the required processing to your needs.

Industry & tradeChoice of gradeProcessing on request

Note: Information on grades, standards and availability are examples. The version confirmed in writing and the agreed delivery terms are decisive.

PRODUCT RANGE & OPTIONS

What matters when ordering.

Dimensions

Widths and thicknesses for different manufacturing requirements – specific availability on request.

Grades

Common austenitic stainless steel grades and other grades as required.

Surfaces

Delivery conditions and grinding finishes according to suitability and agreement.

Cutting

Material sections and fixed lengths according to drawing or specification.

EHI EXPERTISE / TECHNICAL ENQUIRIES

Stainless steel flat bar for construction and further processing

Flat bar is used in metalworking, mechanical engineering and for brackets, beams, straps and technical components. Even with a simple parts list it pays to distinguish clearly between rolled flat bar and strips cut from sheet: dimensional tolerances, edge finish and surfaces can differ.

For a calculable enquiry we need thickness, width, length and quantity as well as the required grade. Designations such as V2A or V4A are common in everyday use, but should be converted into grade numbers for the order. The combination of standard and inspection certificate belongs in the drawing or purchasing conditions where applicable.

EHI also offers sawing material to agreed specifications and processing surfaces. For ground visible surfaces, grinding direction, visual requirements and protection of the surface during transport should also be described.

Technical details for a clear material enquiry
Typical cross-section specificationWidth × thickness or thickness × width with clear assignment, plus length and quantity
Standard referenceDepending on the manufacturing method, e.g. EN 10058 for hot-rolled flat bar; state the appropriate standard
Grade examples1.4301 (AISI 304) and 1.4404 (AISI 316L)
SurfaceMill surface or ground to sample/grit
ProcessingCut-to-length pieces and agreed surface processing

Availability and standards note: The dimensions, standards and grade assignments stated are for technical guidance and are not a stock or delivery commitment. The specific enquiry, specification and written order confirmation are decisive.

Frequently asked questions

Flat bar or sheet strip – what is the difference?

Manufacturing route, edge condition, tolerances and surface can differ. The required version should be named specifically.

What belongs in a flat bar enquiry?

Grade number, cross-section, length, quantity, required edge condition, standard and, where applicable, surface specification.

Clarify your material requirements with EHI ↗

EHI STOCK RANGE / FLAT BAR

Flat bar cut from strip or plate, hot-rolled or bright drawn from stock

We stock stainless steel flat bar at our Burbach warehouse in widths from 10 to 300 mm – hot-rolled or bright drawn as well as cut from strip or plate. On our Löser lines we grind flat bar on all sides; you choose the grit between grit 60 and grit 1200. Fixed lengths are cut on our own saw. Delivery within Germany usually within 48 hours.

Weight for guidance: flat bar 40 × 8 mm weighs about 2.51 kg/m, 100 × 8 mm about 6.28 kg/m.

Discuss your material requirements?

Tell us grade, dimensions, quantity and delivery date. We will check your enquiry.

Put together an enquiry ↗

Standards and choice of grade

Standards (with former DIN designations)

  • EN 10058 – hot-rolled flat bar (formerly DIN 1017)
  • EN 10278 – bright flat bar (formerly DIN 174)
  • EN 10088-3 – grades and technical delivery conditions

Which grade for what?

  • 1.4307 / 1.4301 – standard for steel construction, metalworking and mechanical engineering
  • 1.4404 / 1.4571 – outdoor use, coastal areas, chemicals

All standards at a glance: Standards overview · all grades: Grades overview · weight: Weight calculator

For your enquiry: price basis and quality documents

For a reliable quotation we need grade, dimension, quantity and, where applicable, surface, tolerance and the required type of certificate. Monthly alloy surcharges and quality documentation are available directly from EHI.