EHI EDELSTAHL/ Stainless steel stockholder · Burbach, Germany
EHI EDELSTAHL / TUBES · WELDED

Welded stainless steel tubes

Welded stainless steel tubes for mechanical engineering, pipeline construction, apparatus engineering and industrial applications – with the right grade, dimension and documentation.

Welded stainless steel tubes with blue protective caps in the EHI warehouseEHI / PRODUCT & SERVICE

TECHNICAL DATA / DOWNLOADS

Dimensions & product range

All dimensions for welded stainless steel tubes – industrial, structural and food-grade tubes as well as square and rectangular tubes – can be found with theoretical weight in our dimension search and in the 2026 product list. You can list several sizes in one enquiry.

Search dimensions →

Product list welded stainless steel tubes 2026 (PDF) ↗

The tables show the standard range of dimensions and are not a stock list: availability by grade, length and quantity is confirmed with our quotation. Dimensions not listed are sourced at short notice.

TECHNICAL ADVICE & MATERIAL SOURCING

Welded stainless steel tubes for your application.

Whether for structures, process lines or industrial manufacturing: with welded stainless steel tubes, the right combination of grade, tube size, manufacturing process and testing requirements is what counts.

Industry & tradeChoice of gradeProcessing on request

Note: Information on grades, standards and availability are examples. The version confirmed in writing and the agreed delivery terms are decisive.

PRODUCT RANGE & OPTIONS

What matters when ordering?

Standards & versions

Depending on the intended use, among others EN 10217-7 for welded stainless steel tubes for pressure purposes as well as other application-specific standards.

Grades

For example 1.4307/1.4301, 1.4404, 1.4541 and 1.4571. Other grades and special versions on request.

Processing

Fixed lengths and ground surfaces according to agreed specification; suitable surface processing depends on dimension and tube shape.

Documentation

Inspection certificates to EN 10204, for example 3.1, depending on product version and agreement.

Which welded tube types are there?

Industrial, structural, decorative and food and beverage tubes – all dimensions can be found in the product list welded stainless steel tubes (PDF).

Industrial tubes EN 10217-7

Welded pressure tubes (formerly DIN 17457) for pipeline, apparatus and plant engineering, test category TC1 or TC2, annealed or not annealed. Grades 1.4307/1.4301, 1.4404, 1.4541 and 1.4571.

Decorative and structural tubes EN 10296-2

For railings, handrails, furniture, mechanical engineering and metalworking (formerly DIN 17455). 1.4307/1.4301, brushed or ground grit 240/320, grit 60 to 1200 on request, individually in tubular film.

Food and beverage tubes EN 10357

Tubes for the food, beverage and chemical industries to EN 10357 (formerly DIN 11850) in finishes CC, BC, CD or BD. Grades 1.4307/1.4301 and 1.4404, with inspection certificate 3.1.

Square and rectangular tubes

Welded hollow sections from 10 × 10 to 250 × 150 mm in 1.4307/1.4301, 1.4404 and 1.4571 – bright or ground grit 240.

What is the difference between EN 10357 and DIN 11850?

EN 10357 is the European successor to DIN 11850 for welded stainless steel tubes in the food and chemical industries. The dimensions are largely the same; today orders state EN 10357 with the finish, for example CC, BC, CD or BD.

Which tubes are suitable as structural tubes?

For railings, handrails, frames and mechanical engineering, decorative and structural tubes to EN 10296-2 in 1.4307/1.4301 are usually used; for outdoor use with chloride exposure, rather 1.4404 or 1.4571.

EHI EXPERTISE / TECHNICAL ENQUIRIES

Welded stainless steel tubes: grade, seam and application

Welded stainless steel tubes are formed from strip or sheet and welded along the length of the tube. For technical selection, not only the outside diameter and wall thickness are decisive, but also weld quality, grade, testing requirements and medium. For pressure lines, EN 10217-7 is an important product standard; other applications may require different specifications.

In purchasing, grades are often referred to as V2A or V4A. These collective terms do not replace a grade number: in trade, 1.4301 roughly corresponds to AISI 304, 1.4404 roughly to AISI 316L and 1.4571 roughly to AISI 316Ti. The binding chemical composition and delivery condition are governed by the agreed product standard.

For structural applications, tube shape, visible weld seam, required surface and any decorative requirements are also important. In chemical and process engineering, documentation, corrosion exposure and test methods can go much further than for a simple structural tube.

Technical details for a clear material enquiry
Product standardEN 10217-7 for welded pressure tubes specified for this purpose; state the standard matching the application
Typical grade enquiry1.4301 / 304, 1.4307 / 304L, 1.4404 / 316L, 1.4571 / 316Ti
Dimension in the enquiryOutside Ø × wall thickness × length, e.g. “Ø 42.4 × 2.0 mm × 6,000 mm” as a writing example, not a stock commitment
Surface and cuttingMill finish, ground grit 60 to 1200 (depending on version), fixed lengths by agreement
Inspection certificateInspection certificate 3.1 to EN 10204 where agreed

Availability and standards note: The dimensions, standards and grade assignments stated are for technical guidance and are not a stock or delivery commitment. The specific enquiry, specification and written order confirmation are decisive.

Frequently asked questions

What is the difference between EN 10217-7 and EN 10296-2?

EN 10217-7 covers welded stainless steel tubes for pressure purposes; EN 10296-2 covers welded circular steel tubes for mechanical engineering and general technical applications. The required use is decisive.

Can EHI supply welded tubes ground?

EHI has its own grinding technology. Whether a particular tube can be processed in the required grit and dimension is checked on the basis of the enquiry.

Clarify your material requirements with EHI ↗

Discuss your material requirements?

Tell us grade, dimensions, quantity and delivery date. We will check your enquiry.

Put together an enquiry ↗

Which standards apply and which grade fits?

Standards (with former DIN designations)

  • EN 10217-7 – welded pressure tubes (formerly DIN 17457), test category TC1 / TC2
  • EN 10296-2 – structural and decorative tubes (formerly DIN 17455), e.g. railings and furniture
  • EN 10357 (formerly DIN 11850) – food and beverage tubes, finish CC, BC, CD or BD
  • ASTM A312 – tubes in inch sizes, SCH 10S / 40S
  • EN ISO 1127 – dimensions and tolerances, e.g. D3/T3 (annealed) or D4/T3 (not annealed)

Which grade for what?

  • 1.4307 / 1.4301 – standard for industrial, decorative and food-grade tubes
  • 1.4404 / 1.4571 – chloride-containing media, outdoor use, chemicals
  • 1.4541 – elevated temperatures

All standards at a glance: Standards overview · all grades: Grades overview · weight: Weight calculator

For your enquiry: price basis and quality documents

For a reliable quotation we need grade, dimension, quantity and, where applicable, surface, tolerance and the required type of certificate. Monthly alloy surcharges and quality documentation are available directly from EHI.