Stainless steel grades at a glance
Grades for tubes, bars, hollow bars and sheets – with EN designation, AISI/UNS equivalent, typical application and availability.
EHI / BURBACH, GERMANYThe overview shows the grades we supply for tubes, bar and profile steel, hollow bars and sheets. “From stock” means grades we keep in our warehouse in Burbach – we will gladly tell you the available sizes; “on request” means short-term sourcing via our partner warehouses. Please always state the full material number, product form, standard and dimensions in your enquiry.
Austenitic steels
| W.-Nr. | Designation (EN 10088) | AISI / UNS | Property / application | Product forms | Availability |
|---|---|---|---|---|---|
| 1.4301 | X5CrNi18-10 | 304 | standard grade, food, construction, mechanical engineering | all products | from stock |
| 1.4306 | X2CrNi19-11 | 304L | low carbon, welded structures | tubes, hollow bars | from stock |
| 1.4307 | X2CrNi18-9 | 304L | low carbon, good weldability | tubes, sheets, bar and profile steel | from stock |
| 1.4305 | X8CrNiS18-9 | 303 | free-machining steel, turned parts | bright, round, hexagon and square bars | from stock |
| 1.4372 | X12CrMnNiN17-7-5 | 201 | Cr-Mn steel, cost-effective alternative | sheets, tubes on request | on request |
| 1.4401 | X5CrNiMo17-12-2 | 316 | Mo-alloyed, good corrosion resistance | tubes, sheets, bars | from stock |
| 1.4404 | X2CrNiMo17-12-2 | 316L | Mo-alloyed, chemicals, marine environments | all products | from stock |
| 1.4432 | X2CrNiMo17-12-3 | 316L | Mo-alloyed, pharma, food | welded tubes | on request |
| 1.4435 | X2CrNiMo18-14-3 | 316L | increased resistance, pharma, chemicals | seamless tubes, bars | from stock |
| 1.4436 | X3CrNiMo17-13-3 | 316 | increased Mo content | sheets, bars | on request |
| 1.4438 | X2CrNiMo18-15-4 | 317L | high Mo content, chemicals, pulp | tubes, sheets on request | on request |
| 1.4541 | X6CrNiTi18-10 | 321 | Ti-stabilised, elevated temperatures | tubes, sheets, round and bright bars | from stock |
| 1.4550 | X6CrNiNb18-10 | 347 | Nb-stabilised, elevated temperatures | tubes, bars on request | on request |
| 1.4571 | X6CrNiMoTi17-12-2 | 316Ti | Ti-stabilised, chemicals, pressure vessels | all products | from stock |
High-alloy austenitic steels
| W.-Nr. | Designation (EN 10088) | AISI / UNS | Property / application | Product forms | Availability |
|---|---|---|---|---|---|
| 1.4439 | X2CrNiMoN17-13-5 | 317LMN | high Mo and nitrogen content, chemicals, chloride media | bright and round bars, hollow bars, tubes, sheets | on request |
| 1.4529 | X1NiCrMoCuN25-20-7 | N08926 | aggressive media, seawater | bars, tubes on request | on request |
| 1.4539 | X1NiCrMoCu25-20-5 | 904L | acids, chemical plants | tubes, bars | from stock |
| 1.4547 | X1CrNiMoCuN20-18-7 | S31254 | 6Mo steel, seawater, offshore | tubes, sheets on request | on request |
| 1.4652 | X1CrNiMoCuN24-22-8 | S32654 | highest pitting resistance | on request | on request |
Ferritic steels
| W.-Nr. | Designation (EN 10088) | AISI / UNS | Property / application | Product forms | Availability |
|---|---|---|---|---|---|
| 1.4003 | X2CrNi12 | S41003 | cost-effective, vehicle and tank construction | sheets on request | on request |
| 1.4016 | X6Cr17 | 430 | decorative applications, indoor use | sheets | from stock |
| 1.4104 | X14CrMoS17 | 430F | free-machining steel, good machinability | round, bright and hexagon bars | from stock |
| 1.4509 | X2CrTiNb18 | 441 | exhaust systems, household appliances | sheets, tubes on request | from stock |
| 1.4510 | X3CrTi17 | 439 | Ti-stabilised, exhaust and household technology | sheets, tubes on request | on request |
| 1.4512 | X2CrTi12 | 409 | exhaust systems | sheets, tubes on request | from stock |
Martensitic and precipitation-hardening steels
| W.-Nr. | Designation (EN 10088) | AISI / UNS | Property / application | Product forms | Availability |
|---|---|---|---|---|---|
| 1.4006 | X12Cr13 | 410 | hardenable, pump and valve parts | bars on request | on request |
| 1.4021 | X20Cr13 | 420 | hardenable, shafts, pump and valve parts | round and bright bars | from stock |
| 1.4028 | X30Cr13 | 420 | hardenable, cutlery, springs | bars | from stock |
| 1.4034 | X46Cr13 | 420 | high hardness, knives, tools | bars | from stock |
| 1.4057 | X17CrNi16-2 | 431 | strong and tough, shafts, spindles | round and bright bars | from stock |
| 1.4112 | X90CrMoV18 | 440B | very hard, rolling bearings, knives | round and bright bars | from stock |
| 1.4122 | X39CrMo17-1 | – | hardenable, fittings, shafts | round and bright bars | from stock |
| 1.4313 | X3CrNiMo13-4 | S41500 | tough, turbine and pump construction | bars | on request |
| 1.4418 | X4CrNiMo16-5-1 | – | strong, offshore, pump shafts | round and bright bars | from stock |
| 1.4542 | X5CrNiCuNb16-4 | 630 (17-4PH) | very high strength | bars | on request |
Duplex and super duplex steels
| W.-Nr. | Designation (EN 10088) | AISI / UNS | Property / application | Product forms | Availability |
|---|---|---|---|---|---|
| 1.4162 | X2CrMnNiN21-5-1 | S32101 | strong, cost-effective duplex alternative | sheets, bars on request | on request |
| 1.4362 | X2CrNiN23-4 | S32304 | strong, good corrosion resistance | sheets, tubes, bars on request | on request |
| 1.4462 | X2CrNiMoN22-5-3 | S32205 | high strength, chloride resistance | tubes, hollow bars, bars, sheets | from stock |
| 1.4410 | X2CrNiMoN25-7-4 | S32750 | very high strength and corrosion resistance | tubes, bars | on request |
| 1.4501 | X2CrNiMoCuWN25-7-4 | S32760 | seawater, offshore | bars | on request |
| 1.4507 | X2CrNiMoCuN25-6-3 | S32520 | seawater, chemicals | bars on request | on request |
Heat-resistant and creep-resistant steels
| W.-Nr. | Designation (EN 10088) | AISI / UNS | Property / application | Product forms | Availability |
|---|---|---|---|---|---|
| 1.4828 | X15CrNiSi20-12 | ~309 | up to approx. 1,000 °C, furnace construction | tubes, round and bright bars | from stock |
| 1.4835 | X9CrNiSiNCe21-11-2 | S30815 | up to approx. 1,100 °C, furnace and plant construction | sheets, tubes on request | on request |
| 1.4841 | X15CrNiSi25-21 | ~314 | up to approx. 1,150 °C, industrial furnaces | tubes, round and bright bars | from stock |
| 1.4848 | GX40CrNiSi25-20 | ~HK40 | cast steel, up to approx. 1,100 °C, furnace and plant construction | from stock – please ask for the product form | from stock |
| 1.4845 | X8CrNi25-21 | 310S | high scaling resistance | sheets, tubes on request | on request |
| 1.4878 | X8CrNiTi18-10 | 321H | elevated temperatures | seamless tubes | from stock |
| 1.4948 | X6CrNi18-10 | 304H | pressure equipment at high temperatures | seamless tubes | on request |
| 1.4959 | X8NiCrAlTi32-21 | N08811 | Ni-rich, petrochemicals, furnace construction | tubes on request | on request |
Nickel-based alloys and other special materials on request. The AISI and UNS details are approximate equivalents; the ordered material number with standard is decisive.
Frequently asked questions about stainless steel grades
Which stainless steel grades does EHI stock?
We keep 26 grades in stock in Burbach: 1.4016, 1.4021, 1.4028, 1.4034, 1.4057, 1.4104, 1.4112, 1.4122, 1.4301, 1.4305, 1.4306, 1.4307, 1.4401, 1.4404, 1.4418, 1.4435, 1.4462, 1.4509, 1.4512, 1.4539, 1.4541, 1.4571, 1.4828, 1.4841, 1.4848, 1.4878. We will tell you on request which sizes are in stock. Other grades are sourced at short notice via our partner warehouses.
What do V2A and V4A mean?
V2A is a colloquial term for chromium-nickel steels such as 1.4301 or 1.4307. V4A stands for molybdenum-alloyed steels such as 1.4401, 1.4404 or 1.4571. High-alloy grades such as 1.4539 (904L), 1.4529 (6Mo) or 1.4547 have no comparable short name; they are usually called highly corrosion-resistant steels (HCR). Always state the full material number in quotations and orders.
What is the difference between 1.4301 and 1.4307?
1.4307 is the low-carbon variant (304L) of 1.4301 (304) and is mainly used for welded structures. Many products are dual-certified as 1.4301/1.4307.
When does a duplex steel make sense?
Duplex steels such as 1.4462 combine high strength with good resistance to chloride-induced stress corrosion cracking. They are used, for example, in offshore, chemical and water applications and often allow thinner walls.
Which inspection certificates does EHI supply?
The standard is the inspection certificate 3.1 to EN 10204, for many products also to AD 2000 data sheet W2 or W10. Other inspections on request.
Your enquiry
Send us material, dimensions and quantity – we will reply with availability, price and delivery time.
E-mail your enquiry ↗ +49 2736 29468-0
We reply in English or German. Prices and documents are issued by EHI Edelstahl GmbH & Co. KG, Burbach, Germany.
